Advertising Freecolor FC-UV4060D DTF Indoor Outdoor UV Flatbed Printer with 15cm Printing Size

Q5: How to maintain the printer if couple of days no using the printer?

If the printer won't use more than 3 days, you must cleaning out all ink in the print head, otherwise, the ink will be dry because the solvent volatilization, even cause irreversible damage for the nozzles of the print head. Below is the solving methods:

A.Move the print head to the cleaning position, put a corrosion resistant container below the print head for filling the waste
cleaning solution.

B.Turn off the power of the printer.

C.Unplug the print head from the ink damper, then using the special cleaning solution to cleaning the print head by glass
syringe,and do this some times, at last do not suction out all cleaning solution from the print head, put enough cleaning solution in the inner of the print head, because the print head can keep the nozzles moisture.

D.Please put the print head into the clean container and seal it.

Q6: What RIP your machine use ? Did your price include RIP?

All prices include RIP, Different machine use different RIP, but all can reach the best vivid color.

Q7: Could your technician Come and install the machine to our address?

No problem, The technicians can come install and train your operators in person, but all fees like round tickets, VISA, lodging and boarding should be assured by buyer.

Q8: How long time of the warranty for your printer?

Our quality is guaranteed 100%, the printers have one year warranty, the spare parts can be replaced within one year free of charge, except for the print head and some damageable parts. The technician can provide help for print-head problems.

Q9: Can we buy the ink from our local market or just yours?

Sure. You can buy the ink from other suppliers, as long as the ink is suitable for our printer and UV led lamp wave length.

Q10: How to do when the status of the printhead is not good ?

A.Turn off power, move the printhead to the initial position, check if the printhead and cap top is in the same line.Do one time
cleaning action, and print the test status.

B.If above operation still can't solve this problem, then disassembly the printhead, cleaning the printhead manually or use
cleaning machine to clean the printhead

C.If the status keep the same after above all operations, then check other pars or change a new printhead to test.